|
|
This is a pretty 47% scale Colt single action army revolver by Uberti in Italy. 6" long overall with a 3 17/32" barrel. Black powder frame, nickel finish, 7 1/2 inch .21 caliber rifled barrel. Beautiful elephant ivory grips by master ivory carver Dennis Holland. The Colt patent dates are stamped into the left front of the frame and the caliber marking is stamped into the left rear of the trigger guard. The Uberti maker's mark is stamped into the bottom of the barrel. Knurled hammer spur. Complete with an original Uberti oak casing, English fit with dark green velour lining. The case includes 20 dummy cartridges with solid brass cases and silver colored bullets. The cartridges are even headstamped W-W 45 COLT. You don't see these original Uberti cases much. Photo 3, Photo 4, Photo 5, Photo 6, Photo 7, Photo 8, Photo 9 Price: $950.00
|
!!!!!SALE!!!!! This 47% scale Colt Walker revolver was originally one of the Presidential Editions from the U.S. Historical Society. Factory engraved, blue and casecolored finish, silver plated backstrap and triggerguard, serial #19. The original one piece silver grip and backstrap has been replaced with a standard back strap and a wonderful high relief carved elephant ivory grip done by Dennis Holland. The left side of the grip showing a Mexican eagle with snake and cactus. Factory roll marked barrel address and factory roll marked cylinder scene. Cased in a nice oak casing with miniature Colt key lock, flask, brass bullet mold with blue steel sprue cutter, combination nipple wrench/screwdriver, and case key.
Engraved Colt Walker with carved ivory grips photo 2
Engraved Colt Walker with carved ivory grips photo 3
Engraved Colt Walker with carved ivory grips photo 4
Engraved Colt Walker with carved ivory grips photo 5
Engraved Colt Walker with carved ivory grips photo 6
Price: !!!!!SALE!!!!! $1,750.00
|
This is a great 1/3 scale Colt Model 1878 double action "Lightning" revolver by master miniaturist David Kucer of Canada. 3" long overall with a 1 1/2" rifled barrel. Case colored frame, hammer, and trigger with the sides of the trigger and hammer polished in the white. The balance blue. Very finely checkered dark walnut one piece grips. The left side of the barrel with a deeply etched panel marked "COLT D.A. .38". The top of the barrel with the two line Colt barrel address. The bottom of the barrel marked D. Kucer. Checkered hammer spur and cylinder pin. Serial # 14. Complete with the original Kucer black leather casing with hinged lid and push button latch. The interior bottom French fit in black velvet with a red and white barber pole stripe edge welting. The interior lid padded red silk with the Kucer logo. There is a small square compartment in the case bottom with a little red pillow. The pillow seams are coming apart on three sides. Other than that, it is in mint new condition. Photo 2, Photo 3, Photo 4, Photo 5, Photo 6, Photo 7, Photo 8, Photo 9, Photo 10, Photo 11, Photo 12, Photo 13, Photo 14, Photo 15, Photo 16, Photo 17 Price: $9,850.00
|
This is a very pretty 47% scale Colt single action army revolver by Uberti in Italy. 5" long overall with a 2 19/32" rifled barrel of .21 caliber. Expertly engraved by master engraver Tom Hicks of Texas with about 80% coverage. Really nice deep chiseled scrolls with wonderful background work. Silver plated finish that is starting to get a nice tarnished patina. High relief raised carved ivory grips with a short horn steer head on the left side. The ivory showing really nice grain. The 5 1/2" barrel has the one line Colt barrel address. Blackpowder frame. Complete with a great key lock walnut casing which includes 18 solid brass dummy cartridges, a brass oiler, interior lid label, and case key. Photo 2, Photo 3, Photo 4, Photo 5, Photo 6, Photo 7, Photo 8, Photo 9, Photo 10, Photo 11, Photo 12, Photo 13, Photo 14, Photo 15, Photo 16, Photo 17, Photo 18, Photo 19 Price: $1,650.00
|
!!!!!SALE!!!!! This is a gorgeous 2/5 scale Colt single action army revolver with 4 3/4" barrel by master miniature maker David Kucer of Montreal, Canada. 4 1/4" longer overall with a 1 7/8" barrel. Beautiful high polish blue finish except for the hammer, trigger, cylinder pin, and ejector rod button which are gold plated. The frame, cylinder, barrel, backstrap, and trigger guard expertly scroll engraved. The cylinder with an inlaid gold band just to the rear of the cylinder stops, the barrel with an inlaid gold band near the frame, and the frame topstrap with an inlaid gold line along each side. The top of the barrel marked with a one line barrel address. The frame marked with two patent dates on the left side. the makers name marked on the bottom of the barrel. Serial # 3. Two piece ivory grips. Cased in a non-original glass topped walnut casing with red felt lining, probably made by Ron DeWalt. The casing includes a gold (probably plated) six point badge marked Deputy US Marshal, and an ivory handled cleaning rod. Fully functional. A truely beautiful piece that really must be held in hand to appreciate! Additional photos available upon request.
Photo 2, Photo 3, Photo 4, Photo 5, Photo 6, Photo 7, Photo 8, Photo 9, Photo 10 Price: !!!!!SALE!!!!! $5,695.00
|
!!!!!SALE!!!!! A beautiful 47% scale London Colt Single Action Army "Flat Top Target" Revolver. This started life as a standard Colt SAA from Uberti. The late Terry Farrand milled off the original top strap, then machined the new Flat Top Target top strap and micro welded it on. He also hand made the special target front sight and base. He then did the high polish on the metal which would be standard on a Flat Top Target model. Roger Sampson hand engraved the markings including the London barrel address on the top of the barrel, .450 Boxer caliber marking on the left side of the barrel just ahead of the frame. The serial #01 is engraved on the frame, triggerguard, backstrap, and the rear of the cylinder. British proof marks are engraved on the top right of the barrel just ahead of the frame and at the rear of the cylinder between the chambers. All blue finish as would be standard on a Flat Top Target model. Two piece black hard rubber grips with the rampant Colt logo near the top and a winged eagle with shield near the bottom on both sides. The grips with brass escutcheons and a fire blue screw. A great piece and perfect in every aspect. Cased in a great walnut key lock hinged top casing with dummy cartridges, oil bottle and Colt instructions interior lid label.
London Colt Flat Top Target model SAA photo 2
London Colt Flat Top Target model SAA photo 3
London Colt Flat Top Target model SAA photo 4
London Colt Flat Top Target model SAA photo 5
London Colt Flat Top Target model SAA photo 6
London Colt Flat Top Target model SAA photo 7
London Colt Flat Top Target model SAA photo 8
London Colt Flat Top Target model SAA photo 9
Price: !!!!!SALE!!!!! $1,750.00
|
|
|
|
